QMobile Energy X1 Firmware Flash File/Stock ROM QMobile Energy X1
Initial Steps to Install Firmware on QMobile Energy X1
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash QMobile Energy X1
- Download install SP flash tool, USB drivers, and firmware for your QMobile Energy X1
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug the phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
See detailed Instruction MT flashing sp tool with images
Might Also Like
Coolpad Note 3S Y91-i00 Firmware Flash File
Blu R0051UU MT6737M Firmware Flash File
File Name: QMobile_Energy_X1_MT6580_V4.0_02122017.zip
File Size: 1 GB
How to Flash: Follow Tutorial
Download Link