Lenovo Vibe P1 P1a41 Firmware Flash File

Lenovo Vibe P1 P1a41 Firmware Flash File/Stock ROM Lenovo Vibe P1 P1a41

Prerequisites for Installing Rom on Lenovo Vibe P1 P1a41

Download and install Lenovo Downloader Tool and Qualcomm USB Drivers for Lenovo Vibe P1 P1a41.
Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
There should be the device called in device management:
Qualcomm HS-USB QDLoader 9008 (COMXX)
In any other case, you have to install drivers manually.
Run Lenovo Downloader Tool.
Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
Load XML in Download Section:
First select RawProgram File: rawprogram0.xml
then Select Patch File: patch0.xml
Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait