ZTE Blade S6 Android 5.0.2 Lollipop Firmware Flash File/Stock ROM ZTE Blade S6
Prerequisites for Installing Rom on ZTE Blade S6
- Download and install QPST 2.7.422 with QFIL
- Download and install Qualcomm USB Drivers.
How To Flash ROM ZTE Blade S6
- Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers. Turn off the phone Run QFIL.
- In any other case u have to install drivers manually.
- Qualcomm HS-USB QDLoader 9008 (COMXX)
- There should be device called in device management:
- Turn off the phone. Hold Vol+ button and plug-in USB Cable. Phone will vibrate one time, screen wil be black. This is DownloadMode.
- Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
- Click Browse… in Programmer Path and choose prog_emmc_firehose_8916.mbn
- Load XML in Download Section:
- First select RawProgram File: rawprogram0.xml
- then Select Patch File: patch0.xml
- Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
- After flashing process starts and might take up to 5-10 minutes. So keep patience and wait
See detailed Instruction Qualcomm flashing QPST tool with imges
Also Like:
ZTE Blade L2 PLUS Andriod 4.4.2 Firmware
ZTE Blade V6 MT6735 Android 5.0.2 Firmware Flash File
Sir, I have hard bricked my ZTE Blade S6. How can I Unbrick it?
dear sir i have download ZTE_Blade_S6.zip file but there no
(prog_emmc_firehose_8916.mbn)
(rawprogram0.xml)
(patch0.xml) file with those file are still i can’t flash.how can i found this file can u give this missing file.
plz
where the link firmware ????????????
link is ok check agin
Sir mere mobile Blade s6 me software nhi dal pa RHA video sand kro gmail par plz sir