Tecno i3 Pro MT6737 Firmware Flash File/Stock ROM Tecno i3 Pro
Initial Steps to Install Firmware on Tecno i3 Pro
- Download and install MTK android USB drivers
- Download And Install SP Flash Tool
How To Flash Tecno i3 Pro
- Download install SP flash tool, USB drivers, and firmware for your Tecno i3 Pro
- Download and install MTK android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
See detailed Instruction MT flashing sp tool with images
Might Also Like
Tecno CX Air MT6737 Firmware Flash File
Tecno i3 MT6737 Firmware Flash File
File Name: Tecno_i3_Pro_MT6737M_19072017.zip
File Size: 2 GB
How to Flash: Follow Tutorial