Samsung J3 J3109 MT6572 Firmware Flash File/Stock ROM Samsung J3 J3109
preloader_mbk72_wet_jb3.bin
MT6572__samsung__SM-J3109__SM-J3109__4.4.4__ALPS.JB3.MP.V1
Initial Steps to Install Firmware on Samsung J3 J3109
Download and install MTK Android USB drivers
Download And Install SP Flash Tool
How To Flash Samsung J3 J3109
- First, you need to download and install SP flash tool and USB driver for your Samsung J3 J3109
- Download and install MTK Android USB drivers
- Then download Firmware file/Flash file/ROM for your phone
- Your phone must have 50 % charging before this process,
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Might Also Like
:
Samsung J7 SM-J700H MT6589 Firmware Flash File
Samsung Galaxy E5 MT6572 Andriod 4.4.2 Flash File