Qmobile Noir J7 MT6595 Android 6.01 Firmware Flash File
Wait for phone…
Phone found! [ 43 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6595
BB_CPU_NME : [MediaTek] MT6595_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA …
Running DA ver.3.2 on BBID : 0x8C
NAND Flash : NOT INSTALLED
eMMC Flash : 150100424A4E423452075B9E5B568329
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R4BNJ
[eMMC] : FLASH_CID : 150100424A4E423452075B9E5B568329
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xB51C1DE347227E32BE8C1953A9129B86
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now …
xGPT : Normalize settings Ok!
Brand : QMobile
ProdName : J7
ProdModel : J7
Device : J7
AndroidVer: 6.0
MTKxCPU : MT6595
MTKxPRJ : WBL5708QM_0201_T5363
[Read Ok] : preloader_gionee6595_lwt_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6595 / V1.1.2 / gionee6595_lwt_m / EMMC
Android Info saved
FW Size : 3298 MiB
Scatter saved to : C:\Users\Mr.bhatti\Desktop\MT6595__QMobile__J7__J7__6.0__WBL5708QM_0201_T5363\
All done!
Done!
Elapsed: 00:10:02
Reconnect Power/Cable!
How To Flash Qmobile Noir J7
- First, you need to download and install SP flash tool
- Download and install MTK android USB driver Qmobile Noir J7
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process,
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
What is file password Dear?
!rJP62XdD-GhDaQC5Op1Zq6_sCop0uZmk2OB4h_a2OOQ