Qmobile E1 MT6735 Firmware Flash File

Qmobile E1 MT6735 Firmware Flash File/Stock ROM Qmobile E1

Qmobile E1_MP_02_13 Official Factory Firmware 

Initial Steps to Install Firmware on Qmobile E1

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Qmobile E1

  1. First, you need to download and install SP flash tool and USB drivers for your
  2. Download and install MTK  android USB driver Qmobile E1
  3. Then download Firmware file/Flash file/ Stock ROM Qmobile E1  for your phone
  4. Your phone must have 50 % charging before this process,
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool.exe and load sectter
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on Qmobile E1 scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing SP tool with images

Password:  e16737byniaz112

Might Also Like

:

QMobile M300 MT6582 firmware | flash file

Qmobile H67 SPD6531 firmware | flash file

3 thoughts on “Qmobile E1 MT6735 Firmware Flash File”

Leave a Comment