Samsung Galaxy J7 J700H MT6580 Firmware Flash File
MT6580__alps__gxq6580_weg_l__gxq6580_weg_l__5.1__ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62
Preloader_gxq6580_weg_l
Initial Steps to Install Firmware on Samsung Galaxy J7 J700H
Download and install MTK Android USB drivers
Download And Install SP Flash Tool
How To Flash Samsung Galaxy J7 J700H
- First, you need to download and install SP flash tool
- Download and install MTK Android USB drivers
- Then download Firmware file/Flash file/ROM for your phone
- Your phone must have 50 % charging before this process,
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SP flash tool.exe
- When SP flash tool open, go to download button in SP flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in SP flash tool
- Close SP flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Might Also Like
:
Samsung Galaxy J7 J700H MT6572 (Clone) Firmware Flash File
Samsung Galaxy J7 J700H MT6582 Firmware Flash File