Rivo Rhythm Rx70 MT6582 firmware | flash file

Rivo Rhythm Rx70 MT6582 Firmware Flash File

Initial Steps to Install Firmware on Rivo Rhythm Rx70   

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Rivo Rhythm Rx70 

  1. First, you need to download and install SP flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process,
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing SP tool with images

Might Also Like

:

Rivo Rhythm RX 65 MT6582 Firmware Flash File

Rivo Rhythm RX90 MT6580 Firmware Flash File

1 thought on “Rivo Rhythm Rx70 MT6582 firmware | flash file”

  1. Finally i downloaded the stock rom in my RIVO RYTHHEM RX70 and now it’s working fine. This is the firt time I installed ROM in any mobile and hence it fulfilled my goal set by me a year ago. Thanks Afzaal Ahmad for your guidance.

    Reply

Leave a Comment